How to Set Up Your Aspire Avata Pod Kit

By Tabakstore | Published: 2026-10-30

Category: How-to Guides

Follow these simple steps to set up your Aspire Avata pod kit for the first time, including pod installation, coil priming, and power adjustment to get the best MTL or RDL vape.

Quick answer

Setting up your Aspire Avata pod kit takes only a few minutes: install the pod, prime the coil, fill the tank, and adjust the power to your preferred draw style.

What you get in the box

Your Aspire Avata arrives as a complete pod kit with a 1100 mAh battery, a USB-C charging cable, and a pre-installed 0.6 Ω pod (or a separate 0.4 Ω pod depending on the package). The tank holds up to 15 ml of e-liquid, split across two fill ports. The body is made of aluminium and PCTG, so it feels sturdy but lightweight.

MTL vs RDL: choosing your pod

The Avata supports both mouth-to-lung (MTL) and restricted direct-lung (RDL) vaping. The 0.6 Ω pod is better for MTL draws with higher nicotine salts, while the 0.4 Ω pod gives a looser RDL draw suitable for freebase e-liquids. Pick the pod that matches your preferred inhale style before you start.

Step-by-step setup guide

Charge the battery: Connect the USB-C cable to the battery and a power source. A full charge takes about 1–2 hours. The LED indicator will turn off when charging is complete. Never charge with a damaged cable or a high-wattage wall adapter; use a standard 1A USB charger.
Install the pod: Remove the pod from its packaging. Align the bottom of the pod with the battery connection and push it in until it clicks into place magnetically. The magnets hold it securely. If the pod does not sit flush, remove it and check for obstructions. Forcing it can damage the magnetic contacts.
Prime the coil: Drip 2–3 drops of e-liquid directly onto the exposed mesh coil inside the pod. Then fill the tank and let it sit for 5–10 minutes so the wick absorbs the liquid fully. Skipping this step can cause a dry hit and burn the coil. Patience here extends pod life.
Fill the tank: Locate the bottom-fill port on the pod. Open the silicone plug, insert the e-liquid bottle tip, and fill until the liquid reaches the max line. Close the plug securely. Do not overfill; leave a small air pocket. The 15 ml capacity is generous—one fill lasts most of the day.
Adjust the power level: Press the fire button three times quickly to cycle through the three power levels (low, medium, high). Start at the lowest setting for a new pod and increase gradually. For 0.6 Ω pods, medium power is usually best. For 0.4 Ω pods, medium to high gives a warmer RDL vape.
Test and adjust the draw: Take a few gentle puffs. If the draw feels too tight or too loose, switch to the other pod resistance. The airflow is fixed per pod, so the pod itself determines the draw style. If you prefer a tighter MTL draw, stick with the 0.6 Ω pod. For a looser RDL draw, use the 0.4 Ω pod.

Product details

Aspire Avata | Pod Kit | Brown: The Aspire Avata Pod Kit (Brown) features a 1100 mAh battery, USB-C charging, three power levels up to 30 W, and a 15 ml total tank volume. It uses Avata pods with 0.4 Ω or 0.6 Ω mesh coils. The 1100 mAh battery provides all-day use for most vapers, and the three power settings let you fine-tune the warmth and vapour production for your chosen pod.
Aspire Avata | Pod Kit | Brown
Aspire Avata | Pod Tank | 1er Pack 0,4 Ohm: The Aspire Avata Pod Tank (0.4 Ω) uses magnetic pod fixation, a transparent PCTG body, and a bottom-fill system with a silicone seal. The coil is integrated into the pod. Magnetic fixation makes pod removal and insertion easy, while the integrated coil means you replace the whole pod instead of just the coil head, simplifying maintenance.
Aspire Avata | Pod Tank | 1er Pack 0,4 Ohm